Glassing the deck went well enough. I stuck to my new "heavier coats" approach with some success, and didn't hit the glass much. As expected, the area of the onlay needed multiple coats to even it out.
Sunday, February 9, 2020
Deck Work
Sanding the deck went fairly routinely. I decided not to go to extraordinary levels of perfection.
This guy is an onlay, not an inlay. I never seemed to get the "excavation" right when I've done inlays, so I went for this method. I'm hoping that everything will saturate all right.
I still had a few problems where the hull stuck out further than the deck, and I couldn't squeeze it in. I sanded it down right through to the bare wood in a few spots, but these will be covered by the deck overlap.
Glassing the deck went well enough. I stuck to my new "heavier coats" approach with some success, and didn't hit the glass much. As expected, the area of the onlay needed multiple coats to even it out.
Glassing the deck went well enough. I stuck to my new "heavier coats" approach with some success, and didn't hit the glass much. As expected, the area of the onlay needed multiple coats to even it out.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment