Thursday, October 1, 2015

Skeg Plans

I decided to build a skeg & housing from scratch. This gives me something to work on & get psyched for the build. I want to complete as much of this as possible before glassing the hull interior, so I won't get hung up in a lengthy process while the hull wants to shrink & distort.
50-page building manual, and lots of small plywood parts, all of which have to be epoxied, and many fiberglassed. I had to order some rather expensive stainless steel parts. 
Nicks plans call for building a closed box, making a hole in the hull, putting the box through the hull, then trimming to the hull. I'm going to shape the box to the hull interior, and make a slot for just the skeg.
I could not get a feel for what has to be done just by reading the manual. I had to get my hands on the work, following the instructions, before I "got it".
After cutting the bottom of of the box, I tested the skeg blade for fit. I broke the hinge. I glued it back together, then broke it again. I decided to duplicate the blade in Lexan:
It was pretty easy to trace from the wood, and I don't have to worry about waterproofing. After some adjustments, it fits fine.

No comments:

Post a Comment