Back To The Hull

Opening the slot for the skeg. This was fairly easy to do with the router. It looked straight from the inside, but it looks off from the outside. I think this may be because the strips were thicker on one side, however, when I insert the blade, it looks straight. We will have to see...

Glassing the hull. This time, I tried using plenty of epoxy to saturate. Lots of it ended up on the floor. I avoided trying to "push" the resin into the glass, and there doesn't appear to be any ripples.
I also figured that the only places I ever get any abrasion damage (barring mishaps) are the bow & stern, so I went for 3 layers of fiberglass in those places, the rest is a single layer